KLETTI can also play it cool

The pressure hoses from KLETTI form the basis of the heated hoses; in addition, they can be used in many other areas as cold hoses without heating and insulation. The hoses are resistant to chemicals such as acids and alkalis in any concentration. Exceptions to this are molten alkali metals and fluorine compounds.

The hose basically consists of an inner core made of PTFE, PA or stainless steel, the steel braid and fittings on both sides. The even wall thickness of the inner core has a significant influence on the lifespan of the pressure hose. Depending on the compressive stress, the core is wrapped with one or more layers of steel wire, wound or built up in combination. The fittings are positively pressed with the pressure hose so that the hose can withstand the desired compressive stresses.

kletti-icon

Pressure hose types

The selection of pressure hose types is determined by the required operating pressure depending on the operating temperature.

T1

Smooth PTFE hose with one braided layer of steel wire, max. working temperature 250 °C

Nominal width DN (NW) 4 6 8 10 13 16 20 25
Max. working pressure in bar 275 240 200 175 150 135 100 80
Burst pressure in bar 1100 960 800 700 600 540 400 320
Min. bending radius in mm 50 75 100 120 135 160 200 250

T2

Smooth PTFE hose with two braided layers of steel wire, max. working temperature 250 °C

Nominal width DN (NW) 6 8 10 13 16 20 25 32 40
Max. working pressure in bar 275 250 225 200 175 150 130 70 50
Burst pressure in bar 1100 1000 900 800 700 600 520 280 200
Min. bending radius in mm 75 100 120 135 160 200 250 500 850

T3

Smooth PTFE hose with two spiralized winding and one braided layer of steel wire, max. operating temperature 250 °C

Nominal width DN (NW) 6 8 10 13 16 20 25 32 38
Max. working pressure in bar 500 475 450 400 400 300 275 250 200
Burst pressure in bar 1800 1600 1500 1500 1300 1200 1100 1000 800
Min. bending radius in mm 75 100 120 135 160 200 240 280 320

Stainless steel corrugated hose

Stainless steel corrugated hose with one braided layer of steel wire, suitable for various applications (working temperature range -220 °C to +550 °C (applies only for the hose))

Nominal width DN (NW) 6 8 10 13 16 20 25 32 40 50
Max. working pressure in bar 100 100 100 65 64 43 49 35 38 25
Min. bending radius in mm 80 125 129 140 160 170 180 260 300 320

PTFE corrugated hose

PTFE corrugated hose with one braided layer of steel wire, suitable for small bending radii and dynamic movements (working temperature range -55 °C to +250 °C)

Nominal width DN (NW) 10 13 16 20 25 32 40 50 65 80
Max. working pressure in bar 125 105 100 90 80 64 53 35 25 20
Burst pressure in bar 500 420 400 360 320 256 212 140 100 80
Min. bending radius in mm 50 65 80 100 125 150 200 250 320 380

PA high pressure hose

Two layers aramid fibre and one braided layer of steel wire, cover made of Polyurethan, (working temperature range -40 °C to +100 °C)

Nominal width DN (NW) 6 8 10 13 16 20 25
Max. working pressure in bar 700 700 700 590 500 450 315
Burst pressure in bar 2800 2800 2800 2360 2000 1800 1260
Min. bending radius in mm 35 60 90 100 160 180 250

Temperature corrective factors remain unchanged. Further Pressure Hoses until DN 80 available on request.